Author: advtnmin

VTN: KÄFTBYTE PÅ FEM
MINUTER MED NY KOMBISAX
Den nya CK-serien innehåller 3 modeller (för maskiner från 13 till 38 t) med vardera 5 käftar. Snabbt käftbyte på 5 minuter med VTNs Fastkeysystem, enkelt och säkert. För att möta dagens komplexa rivningskrav har VTN tagit fram detta kombinationsverktyg för uthyrningsföretag som behöver olika lösningar för olika
kunders behov samt entreprenörer som vill använda ett och samma verktyg för olika slags jobb.

“Multipurpose” is the adjective that has inspired VTN Europe for the development and design of the NEW Combi Kit multitool; thanks to its innovative features, this attachment meets the largest variety of complex demolition requirements. Engineered in detail it is particularly suitable for:

• Specialized Demolition Contractors who are always focused to safety, efficiency and productivity on job sites.
• Hire Companies focused on the demolition market offering different solutions based on customer needs.
• The User who searches in only one equipment the “synthesis” of its various activities.

The ne Combi Kit is Multipurpose because lets you run any type of demolition:

• primary, to bring down a building and remove the materials, either concrete or steel constructions, or combination
• secondary, to separate or reduce into smaller fragments what has already been demolished facilitating the handling and transport
• selective, where it is necessary to extract and recover “precious” elements or components or for the reclamation of areas of high environmental impact where the presence of toxic, flammable and polluting is high.

CK is “Versatile” because with only one equipment you have five jaws configuration:

• D Jaws for Primary and Selective demolition
• P Jaws for Primary and Secondary demolition, to reduce concrete elements and separate the inside round bars from it
• S Jaws for Primary, Secondary and Selective demolition of steel structure. Equipped with reusable and removable blades
• R Jaws, a compromise between D and S jaws
• CH Jaws for Primary and Secondary demolition, to reduce in small pieces (cubes) concrete elements (ex. walls, beams, columns).

CK is “Fast and Safe” because it need only few minutes for the replacement of the jaws with the rotation of only 2 pins.

3 models (April 2016):

• CK14 for excavator between the 13 and 21 ton
• CK21 for excavator between 18 and 27 ton
• CK28 for excavator between 26 and 38 ton

SITE VISIT:

Sporting a VTNFP24 pulveriser and starting from the grable end of the Langham Ward.. (click image)

VTN Europe is a family business specialized in the production of equipment for excavators and wheel loaders. VTN today mainly deals with demolition and recycling, exporting all over the european continent.

Read More

P. Flannery Plant hire (Oval) Ltd invest in new Demolition spec machines and attachments

Nationwide plant hire company P Flannery have taken delivery of fifteen new Liugong demolition spec excavators ranging between eight, fifteen and twenty three tonne machines in the form of the 908, 915D and 922E models along with nineteen new VTN demolition attachments including MT05, MT10 & MT20 multiprocessors, MD100, MD140 & MD210 selector grabs and FP12 & FP18 dedicated concrete pulverisors.

The significant investment in new plant and attachments comes off the back of an increase in business and a demand from customers for more demolition spec machinery available from their hire fleet.

P Flannery Plant hire operate out of their main North London headquarters based in Wembley and support four other local depots based in Manchester, Newport, Northumberland and Aberdeen. With over eighteen hundred pieces of plant currently available from their hire fleet, Flannery are well placed to offer their clients some of the best machinery and attachments available on the market. Continued investment ensures that their customers are consistently provided with the most modern, environmentally friendly and cost effective machines and attachments.

SCREEN, AERATE AND MIX WITH JUST 1 PRODUCT!

With the latest addition of the new DSG25 screening bucket VTN EUROPE now offers the widest package of screening and recycling products. The DSG25 completes the already full range of recycling products, and it has been placed between the oscillating screening bucket SBand the rotary screening bucket SR, well-known and successful in the market.

Thanks to its innovative system of rollers/rotating blades the DSG bucket guarantees the best productivity in screening dry as well as humid, wet and sticky materials (soil, compost, sand, clay). VTN engineers evaluated even the smallest detail and worked for an attachment of easy maintenance, high productivity and with the lowest operation costs. The strong frame design, the chain drive and the centralized greasing system, are, together with the two hydraulic cylinders some of the main features of this original bucket.

The rollers, made of high wear resistant steel (Hardox 500/600), are easly replaceable and permit the user to adjust the output material size according to its needs ( the blade spacing is from 15 to 75 mm). The DSG 25 has been designed for excavators as well as for wheel loaders and finds its optimal application when a very thin screening, the compact material crushing or the aeration of polluted soils are required. The DSG is also used to fill up dugout, in dry and also humid environments.

TECH SPEC:

• 3 models for excavators with operating weight from 2 to 13 ton
• Pressure intensifier HP BOOSTER
• Compact-designed 360° rotation
• Fully-protected cylinder
• High power levels
• Lower fuel consumption
  Optimal use of the carrying machine
• Interchangeable blades
• Synchronic jaw-moving system
• Fast Working cycles
• Optimal power weight

Tech Spec:

• 1 Model for excavators with operating weight from 21 to 35 ton
• 360° rotation
• Fully-protected cylinder
• 4-times reversible interchangeable blades
• Designed to cut UIC 60 rails

With more than 40 years of experience, and always searching for product improvements, VTN EUROPE SPA extends its range of hydraulic shears for the cutting of ferrous materials with the introduction of the new model CI4000.

It can be fitted on excavators from 25 to 45t, on the excavator’s boom or on the excavator’s dipper, the new CI4000 summarises and exalt the construction and performance features of the VTN Millennium shears.

NEW TIP

• it’s bolted to the jaw to reduce the replacement and maintenance time and costs and has an internal brake system to get more resistance and a longer life.

ALIGNMENT GUIDE

• A double guide for the moving jaws allows a perfect alignment.
  Easy adjustment reduces the time to set up.

REPLACEABLE BLADES

• The new blades, with their completely new design, revisited shape and dimension, make their blades exchangeable 4 times before the replacement. The “Rhomboidal” profile improves cutting ability and reduces stress on the shear.
  The way the new blades are threaded provides an easy set up and replacement.

SPECIFIC DESIGN

• A deeper mouth and new cutting angle increase the cutting performance providing strong grip and easy release of the material.

HIGH PERFORMANCE CYLINDER

• The new cylinder provides high cutting performance. It’s also reverse mounted so the rod is completely protected from any impact or damage.

360° ROTATION

• Continuous 360° rotation with hydraulic motor positioned on the top. Equipped with protection valves and flow regulators, it ensures a perfect and accurate shear position.

SPEED VALVE

• Reduces cycle time and considerably increases productivity.

JAW ADJUSTMENT KIT

• The innovative jaw adjustment kit allows to easily reduce/eliminate plays, giving and high cutting performance. The fulcrum pin can be removed for maintenance.
  The new CI4000 has been made of special steel highly resistant (Hardox); all structures are heat treated to eliminate the remaining welding tensions. All components provide the very best quality, reliability and long duration.

Update: Discover the New CI Revolution Line

“With our forty years of experience in manufacturing of tools for costruction equipments, and of attachments for demolition and recycling works, we decided to join the group Unacea.

Having the possibility to be represented all over the world means for us added value for the protection and development of new goals. Moreover, this let us succeed all difficulties the companies of our sector are meeting, and bring to light the excellence of the worldwide known Made in Italy.”

Matteo Vaccaro

Ceo of VTN Europe S.p.A.